|
Who's Online
There currently are 5610 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Perfect for my use.Could have better pictures,but otherwise perfect ;)
;
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
;
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
;
The manual was exactly what I wanted and I found it nowhere else. Thanks!
;
Having purchased a 1994 Kenwood music system from a Charity shop in 2013 (it was a high end product in its day), I found myself not quite knowing where to plug in what, and how to do this, that and the next thing. I needed a Manual, and after failure with another online 'Manual provider' I found Owner Manuals dot com. Well, I wasn't sure, but it was only $5, and if things didn't work out, I wouldn't have lost much...
But things DID work out. After paying my childrens inheritance money, $4.99, I was sent a Manual for my Kenwood System very quickly. Alas, it was in German, and being Scottish, I could not read it or get my system in order from it...a rapid email to them brought the English Manual in short order, and my retro-system was and IS up and running in it's regulation settings.
I am very grateful to http://www.owner-manuals.com for their quick service and for even having such an obsolete Manual in the first place! If you need a Manual for ANYTHING, try here first. I wouldn't be surprised if I bought a 1928 Marconi radio, and got the user Manual for THAT here too!
Top marks.
John Copeland
Glasgow
Scotland
Table Kerf Insert BB1201 WARNING Read and understand the manual for the use of the tool with this accessory.
1. Unplug the saw. Lower the head assembly and lock into position. Remove the six (6) kerf insert screws using the Phillips screw driver (Figure 1). Remove kerf insert and replace with new kerf insert. Insert the six (6) kerf insert screws and tighten.
4 5 5
Kerf Insert Screws
2.
3. 4.
Cutting Kerf Inserts
Kerf Insert NOTE: New inserts need to be cut initially to provide blade clearance. This should be done by carefully making a straight cut through the insert.
4 0
5
Figure 1. Kerf Insert
! AVERTISSEMENT
Il convient de lire et de comprendre le manuel pour l'utilisation de l'outil avec cet accessoire.
Insert de Trait de Scie de Table BB1201
1. Débranchez la scie. Abaissez la tête et bloquez en place. 2. Desserrez les six (6) vis d�encoche à l�aide d�un tournevis à empreinte cruciforme (Figure 1). 3. Retirez l'insert de trait de scie et remplacez-le par un nouvel insert de trait de scie. 4. Insérez les six (6) vis d'insert de trait de scie et serrez. Vis d�encoche
5
Coupe des inserts d�encoche
REMARQUE : Les nouveaux inserts doivent être coupés initialement afin d�assurer une espace suffisante autour de la lame. Ceci doit être fait en pratiquant soigneusement une coupe droite à travers l'insert.
4 0 0 4 4 0 3 5 1 6 5 3
Inserts d�encoche
3
3 0 0 3 5 2 5
Figure 1. Insert d�encoche
Accesorios de Inserción de la Mesa Para la Separación de Corte BB1201 !
ADVERTENCIA
Lea y entienda el manual para el uso de la herramienta con este accesorio.
4
1. Desenchufe la sierra. Baje el ensamblaje del cabezal y fÃjelo en su sitio. 2. Afloje los seis (6) tornillos del accesorio de inserción para la separación de corte usando el destornillador Phillips (Figura 1). 3. Quite el accesorio de inserción para la separación de corte y reemplácelo con uno nuevo. 4. Introduzca los seis (6) tornillos del accesorio de inserción para la separación de corte y apriételos. Tornillos del accesorio de inserción para la separación de corte
Corte de accesorios de inserción para la separación de corte
NOTA: Hay que cortar inicialmente los accesorios de inserción nuevos para proporcionar un espacio libre para la hoja. Esto se debe hacer con cuidado haciendo un corte recto a través del accesorio de inserción.
2 610 995 765 4/98
Figura 1. Accesorio de inserción para la separación de corte
PRINTED IN U.S.A.
6 5 3 5 1 30 03
Accesorios de inserción para la separación de corte
2
5 5 2 5 2 2 0
1 50 01
0 10 55
2 2 0 1 5 5 1 0
1 0
1
|
|
|
> |
|