Irrespectively of this manual exist only germany language, it's useful - although i need some additional task to translate: My english is bad, but usable - but i really dont speak germany. :)
Excellent service from this company (including a total refund on an earlier purchase when through no fault of the company the manual was incomplete). I have purchased several manuals which I have been very satisfied with, as I am with this one. Highly recommended.
Manual was delivered in a timely manner and was all in English as advertised. The manuals I received when we moved into our flat were in German, Italian, and French. Having never used a steamer before, and not speaking/reading German very well, I needed an English Manual. this was a huge help.
Great Manual. This manual is available no where else. It was exactly what I was looking for. Only in German.
Text excerpt from page 1 (click to view)
Extension and Stock Stop BA162
WARNING Read and understand the manual for the use of the tool with this accessory.
Extension and Stock Stop - This attachment allows extra support for longer workpieces. Assembly 1. Unplug the saw. Lock the miter saw table in the 0 degree miter position, lower head assembly and lock head in the down position. NOTE: The stock stop can be mounted on the left or right side of saw to suit your operation. 2. Tilt saw back on its side to expose bottom side of base. 3. Slide adjustable stock stop on back rail of extension arm (Figure 1 & 2). 4. Slide extension arm through first pair of 1/2" diameter holes on outside of miter saw base (Figure 3). 5. Find the second pair of holes underneath miter saw base. Place "U" bracket over hole nearest to the front edge of the miter saw (Figure 3). 6. Slide extension arm through both the second pair of holes and "U" bracket. Make sure the extension arm passes completely through the second pair of holes (Figure 3). 7. Tighten hex bolt on "U" bracket with wrench to hold extension arm in place (Figure 3). 8. Repeat steps 5 - 7 for other side of miter saw. 9. Move adjustable stock stop as shown in Figure 4.
HEX BOLT BOULON HEXAGONAL "U" BRACKET SUPPORT EN U WING SCREW VIS � OREILLES EXTENSION ARM BRAS DE RALLONGE STOCK STOP BUT�E DE MAT�RIAU WING SCREW VIS � OREILLES STOCK STOP BUT�E DE MAT�RIAU